RL75-2
Benefits at a glance
- High speed processing cycle
- Easy handling
- Easy to maintain
- Low weight
- High pulling force
- Balanced pressure point on the trigger
- Ergonomic handle
- Center of gravity of the tool is in the middle of the tool
- Air connection at the back of the tool
- Suspension device for balancer
- Safety relief valve in the tool
- Rivet mandrel container with quick release
(optionally available adapter + container)
Working range - lockbolts*
Fastener |
Standard |
DeltaBolt® |
||||||
| 4.8 | 6.4 | 8.0 | 9.6 | 4.8 | 6.4 | 8.0 | 9.6 | |
| Aluminium | x | x | ||||||
| Steel | x | x | x | x | ||||
| Stainless steel | x | x | ||||||
Fastener |
Multigrip |
Hucktainer® |
|||
| 4,8 | 6,4 | 7,8 | 9,6 | 9,5 | |
| Aluminium | x | x | |||
| Steel | x | x | x | ||
| Stainless steel | x | x | |||
Working range - high-strength blind rivets*
Fastener |
TIBULB blind rivet ø |
M-LOCK blind rivet ø |
||||
| 4.8 | 6.4 | 7.8 | 4.8 | 6.4 | 9.5 | |
| Aluminium | x | x | x | x | ||
| Steel | x | x | x | x | x | |
| Stainless steel | x | x | x | x | ||
Fastener |
MAGNA-BULB® blind rivet ø |
BOM® blind rivet ø |
|||||
| 4.8 | 6.4 | 7.8 | 4.8 | 6.4 | 7.8 | 9.5 | |
| Aluminium | |||||||
| Steel | x | x | |||||
| Stainless steel | |||||||
Technical specifications
| Weight (according to the version): | 1.71 kg |
| Dimensions (HxL): | 331 x 218 mm |
| Lockbolts: | 5.0 – 6.5 mm |
| High-strength blind rivets: | 4.8 – 6.4 mm |
| Pulling force: | 28 kN / 6 bar |
| Stroke: | 17 mm |
| Rivet cycle: | 0.9 s (without rivet) |
| Air consumption for 1 rivet: | 5.8 l |
| Noise level: | 86 dB |
| Operating pressure: | 6.0 bar, max. 7 bar |
| Air supply connection: | 6 mm, (G1/"4) |
| Hydraulic oil standard: | ISO HN 32 |
| Hydraulic oil example: | OH-HM 32 |
| Lubricant standard: | ISO XCCHB-2 |
| Lubricant example: | LV2EP |
Scope of delivery
RL75-2 rivet installation tool
Oil refill set
Angled air supply
Operating instructions
Article No. 385 060 350
Downloads
No results found