RL60-2
Benefits at a glance
- High speed processing cycle
- Riveting cycle approx. 1 second
- Economical air consumption due to separate trigger
- Simple handling
- Easy to maintain
- Low weight
- Balanced pressure point at the trigger
- Center of gravity of the tool is in the middle of the tool
- Ergonomic handle
- Air connection at the back of the tool
- Suspension device for balancer
- Tool-free removal of the pulling unit
- Safety relief valve in the tool
- Rivet mandrel container with quick release
Working range
Rivet Ø [mm] | 2.4 | 3.0/3.2 | 4.0 | 4.8/5.0 | 6.0 | 6.4 |
| Aluminium, copper | x | x | x | x | ||
| Steel | x | x | x | x | ||
| Stainless steel | x | x | x | x* |
* Depending on rivet type
Working range - high-strength blind rivets
Fastener | TIBULB | TIBULB Plus | HUCKLOK | Magna-Lok / M-Lock |
| Aluminium | x | x x | ||
| Steel | x (x)* | (x)* | x | x x |
| Stainless steel | x | x x |
Fastener | TIFAS M-Bolt | Magna-Bulb | BOM |
| Aluminium | x x | ||
| Steel | x x | x x | |
| Stainless | x x |
* Can be used if tool is retrofitted with jaw case retrofit kit 431 821 870 and nose piece 431 502 870.
Technical specifications
| Weight (according to the version): | 1.99 kg |
| Dimensions (HxL): | 331 x 336 mm |
| Blind rivet diameter: | 4.0 – 6.4 mm, max. mandrel Ø 4 mm |
| Pulling force: | 17.9 kN / 6 bar |
| Stroke: | 27 mm |
| Rivet cycle: | 1.0 s (without rivet) |
| Air consumption for 1 rivet: | 5.8 l |
| Noise level: | 85.5 dB |
| Operating pressure: | 6.0 bar, max. 7 bar |
| Air supply connection: | 6 mm, (G1/"4) |
| Hydraulic oil standard: | ISO HN 32 |
| Hydraulic oil example: | OH-HM 32 |
| Lubricant standard: | ISO XCCHB-2 |
| Lubricant example: | LV2EP |
Scope of delivery
RL60-2 rivet installation tool
Nose pieces: 4,0 mm; 4,8 / 5,0 mm; 6,0 mm; 6,4 mm;
Oil refill set
Angled air supply
Operating instructions
Article No. 431 500 750
Downloads
No results found